ADT Control Panel System Reboot (Command 7" Touchscreen AIO ADT7AIO)

Tanya Adebiyi Updated by Tanya Adebiyi

System Reboot for Command 7" Touchscreen AIO ADT7AIO

To correct certain trouble conditions, you may be asked to reboot your Command system. A system reboot will shut down the Command panel and bring it back up again. Connections with the internet and system devices will be disconnected. They will be re-established when the system comes up again. System programming, such as user codes, panel options and Wi-Fi configuration will not be changed.

To reboot the system:

  1. Be sure your Command panel is disarmed.
  2. On the panel, tap the right arrow to access the second menu.
  3. Tap Tools.
  4. Enter the master code.
  5. Tap the Advanced icon.
  6. Tap System Reboot.
  7. The screen will go blank for a few seconds, then "Resideo" will display. This is the manufacturer of the panel.
  8. The system will then display a message that it is starting up. This will take less than a minute.
  9. Once the reboot is complete, the home screen will display.

How did we do?

How to Run ADT Activity Reports Filtered by Date/Location

Contact