Table of Contents

Boot from USB and BIOS Setup

William Gordon Updated by William Gordon

Boot from USB and BIOS Setup

This guide will walk you through enabling USB support in the BIOS Setup and then how to boot from the USB Storage Device

Booting into BIOS for Setup

  1. During boot press F2 to load the BIOS Setup
  1. In the BIOS Setup under Storage select AHCI/NVMe for the SATA/NVMe Operation
  1. In the BIOS Setup under Integrated Devices enable the Enable USB Support checkbox
  1. Select Apply Changes and then restart

Booting from a USB Storage Device

  1. During boot press F12 to load the Boot Menu
  1. Identify and select your USB Device from the Boot Menu

How did we do?

Contact